PF and SW Releases

Collapse

Announcement

Collapse
No announcement yet.

Simulation of Renewable Energy Sources Using PowerFactory

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Simulation of Renewable Energy Sources Using PowerFactory

    Complex studies for the integration of renewable generation into electrical networks are an integral part of network planning and analysis. PowerFactory combines extensive modelling capabilities with advanced solution algorithms.
    Network and park models are easily created using an intuitive drawing toolbox, while the use of model templates and an extensive model library allow complete plant models to be constructed efficiently.
    A full set of tools is provided to undertake the wide range of studies required for grid connection and grid impact analysis of wind parks, PV generation and all other renewable energy power plants. Recurring tasks can easily be automated using scripting tools, to streamline the analysis process.

    SELECTED KEY FEATURES
    • Economic assessment using the Power Park Energy Analysis tool
    • Steady-state load flow calculations taking into account voltage-dependent reactive power capability limits, power park controllers with set-point characteristics, etc.
    • PV system model with integrated power calculation based on solar radiation (1 and 3-phase technology)
    • Short-Circuit calculation according to IEC 60909 and ANSI, and complete method with dynamic voltage support according to k-factor settings
    • Medium to long-term Quasi-Dynamic Simulation
    • Stochastic wind models and probabilistic analysis tools
    • Balanced and unbalanced stability and EMT simulation, e.g.for UVRT and OVRT analysis
    • Multiple domain co-simulation (RMS/EMT)
    • Models for all established wind turbine and generator/ converter types, photovoltaic systems, battery energy storage, STATCOMs and HVDC systems
    • Dynamic models according to IEC 61400-27-1 and WECC
    • Interface for external models according to IEC61400-27-1
    • User-defined modelling for Quasi-Dynamic, RMS and EMT simulation
    • Encryption option for user-defined models and compilation option (DLL model interface)
    • Power quality assessment including harmonic analysis with frequency-dependent Norton equivalents, impedance frequency sweeps and Flicker meter calculation
    • Model Frequency Response analysis (Bode and Nyquist Diagrams)

  • #2
    For grid integration or grid impact studies of PV systems you need modules such as load flow calculation, short-circuit calculation, power quality, power system stability, etc.
    These modules are selected by client with the Base Package. Depending on type of study required and the details of analysis, then modules can be selected or added at later stage to the license.

    Comment

    Working...
    X