PF and SW Releases

Collapse

Announcement

Collapse
No announcement yet.

Dynamic Monitoring of Power System and Data Analysis

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dynamic Monitoring of Power System and Data Analysis

    In this thread I will present to you some data measurement and how we can use PowerFactory to display and analyse the data measured by DIgSILENT PowerFactory Monitor (PFM).

    You can select PFM Master Station ans shown below.

    Click image for larger version

Name:	01.png
Views:	1
Size:	43.8 KB
ID:	745

    Activation of project can be done by selecting data manager or from drop down menu as shown

    Click image for larger version

Name:	02.png
Views:	1
Size:	62.8 KB
ID:	744

    You can select create new plot or open plot from icons at top left hand corner.
    Make sure you adjust the correct date and Camtrade file is selected.

    Click image for larger version

Name:	03.png
Views:	1
Size:	73.4 KB
ID:	743

    You can then select the display required on the plot. Triggers can be shown by pressing the icon Show Triggers.

    Click image for larger version

Name:	04.png
Views:	1
Size:	157.3 KB
ID:	742

    If you highlight a trigger, write click to show instantaneous values.

    Click image for larger version

Name:	05.png
Views:	1
Size:	157.3 KB
ID:	741

    You can display other results by selecting the graph and then Edit.

    Click image for larger version

Name:	06.png
Views:	1
Size:	103.2 KB
ID:	747

    Click on result file and select from data manager as shown

    Click image for larger version

Name:	07.png
Views:	1
Size:	122.6 KB
ID:	746

  • #2
    Re: Dynamic Monitoring of Power System and Data Analysis

    you can also display the instantaneous values directly from the plot.
    Right click on the plot trigger label and select jump to as shown

    Click image for larger version

Name:	09.jpg
Views:	1
Size:	59.5 KB
ID:	592

    The following graphs will be displayed.

    Click image for larger version

Name:	08.png
Views:	1
Size:	228.1 KB
ID:	591

    Comment

    Working...
    X